Anmol Chemicals is the pioneer manufacturers of Polyvinyl Acetate, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Polyvinyl Acetate made in an ISO9001, ISO22000 (FSSC22000) cGMP & GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Polyvinyl Acetate is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ------------ Contact

Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Jumbo Packing Polyvinyl Acetate

Polyvinyl Acetate BP Ph Eur USP NF FCC Food Grade Manufacturers

Polyvinyl Acetate CAS Number: 9003-20-7

Polyvinyl Acetate SDS of Manufacturers

Phenylmercuric Acetate BP Ph Eur Grade Specifications
Ph Eur
C8H8HgO2 --- 336.7 --- 62-38-4

Action and use: Antiseptic, antimicrobial preservative.

DEFINITION
Content: 98.0 per cent to 100.5 per cent (dried substance).

CHARACTERS
Appearance: White or yellowish, crystalline powder or small, colourless crystals.
Solubility: Slightly soluble in water, soluble in acetone and in alcohol.

IDENTIFICATION
First identification A.
Second identification B, C.
A. Infrared absorption spectrophotometry.
B. To 5 ml of solution S (see Tests) add 5 ml of water and 0.1 ml of sodium sulphide solution. A white precipitate is formed that darkens slowly on heating.
C. To 10 ml of solution S add 2 ml of potassium iodide solution and shake vigorously. Filter. The filtrate gives reaction (b) of acetates.

TESTS
Solution S: Dissolve 0.250 g in 40 ml of water by heating to boiling. Allow to cool and dilute to 50 ml with water. Prepare the solution immediately before use.
Appearance of solution: Solution S is not more opalescent than reference suspension and is colourless.
Ionised mercury: Maximum 0.2 per cent.
Polymercuric benzene compounds: Maximum 1.5 per cent.
Loss on drying: Maximum 0.5 per cent, determined on 0.500 g by drying in an oven at 45C for 15 h.


Phenylmercuric Acetate USP NF Grade Specifications
C8H8HgO2 336.74
Mercury, (acetato-O)phenyl-.
(Acetato)phenylmercury [62-38-4].

Phenylmercuric Acetate contains not less than 98.0 percent and not more than 100.5 percent of C8H8HgO2.

Identification:
A: Add 0.5 mL of nitric acid to 0.1 g of it, warm gently until a dark brown color is produced, and dilute with water to 10 mL: the characteristic odor of nitrobenzene is evolved.
B: To 0.1 g of it add 0.5 mL of sulfuric acid and 1 mL of alcohol, and warm: the characteristic odor of ethyl acetate is evolved.
C: To 5 mL of a saturated solution in water add a few drops of sodium sulfide: a white precipitate is formed, which turns black when the mixture is boiled and then allowed to stand.

Melting range: between 149 and 153 .
Residue on ignition: not more than 0.2%.
Mercuric salts and Heavy metals: Heat about 100 mg with 15 mL of water, cool, and filter. To the filtrate add a few drops of sodium sulfide: the resulting precipitate shows no immediate color.
Polymercurated benzene compounds: Shake 2.0 g with 100 mL of acetone, and filter. Wash the residue with successive portions of acetone until a total of 50 mL is used, then dry the residue at 105C for 1 hour, and weigh: the weight of the residue does not exceed 30 mg (1.5%).


Polyvinyl Acetate FCC Food Grade Grade Specifications
CAS: [9003-20-7]

DESCRIPTION
Polyvinyl Acetate occurs as a clear, water white to pale yellow, solid resin. It is prepared by the polymerization of vinyl acetate. After completion of polymerization, the resin is freed of traces of residual catalyst (usually a peroxide), monomer, and/or solvent by vacuum drying, steam sparging, washing, or any combination of these treatments. The resin is soluble in acetone, but it is insoluble in water.
Function:Masticatory substance in chewing gum base.

REQUIREMENTS
Identification: The infrared absorption spectrum of a melted sample on a potassium bromide plate exhibits relative maxima at the same wavelengths as those of a typical spectrum as shown in the section on Infrared Spectra, using the same test conditions as specified therein.
Free Acetic Acid: Not more than 0.05%.
Lead: Not more than 3 mg/kg.
Loss on Drying: Not more than 1.0%.
Molecular Weight: Not less than 2000.

Polyvinyl Acetate USP NF BP Ph Eur FCC Food Grade manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Anmol Chemicals

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 10 January, 2022

Barter

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you