Anmol Chemicals is the pioneer manufacturers of Benzophenone, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Benzophenone made in an ISO9001, ISO22000 (FSSC22000) cGMP & GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Benzophenone is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ------------ Contact

Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Jumbo Packing Benzophenone Suppliers

Benzophenone SDS of Manufacturers

CAS Number: 119-61-9, EINECS EC Number: 204-337-6, Molecular Formula: C13H10O, Molecular Weight: 182.22, FEMA: 2134

Benzophenone Properties and Specifications of Manufacturers

Benzophenone or Phenyl ketone or Diphenylmethanone or Benzoylphenyl or Diphenyl ketone or Benzoylbenzene SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet

Section 1: Product and Company Identification

Product Name & Other Names: Benzophenone or Phenyl ketone or Diphenylmethanone or Benzoylphenyl or Diphenyl ketone or Benzoylbenzene.
CAS No.: 119-61-9
EINECS, EC Number: 204-337-6
Molecular Weight: 182.22
Chemical Formula: C13H10O
Relevant uses and uses advised against (if any): Laboratory chemicals, Manufacture of substances

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Specific target organ toxicity - repeated exposure (Category 2), H373
Chronic aquatic toxicity (Category 3), H412

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Health Hazard
Health Hazard

Signal Words: Warning

Hazard statements:
H373: May causes damage to organs through prolonged or repeated exposure.
H410: Harmful to aquatic life with long lasting effects.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264 Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P391: Collect spillage.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Classification according to European Directive 67/548/EEC as amended:
Hazard symbol:
Xn Harmful
R-phrases:
R48 Danger of serious damage to health by prolonged exposure
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Section 3: Composition / Information on Ingredients

Product Name & Other Names: Benzophenone or Phenyl ketone or Diphenylmethanone or Benzoylphenyl or Diphenyl ketone or Benzoylbenzene.
CAS No.: 119-61-9
EINECS, EC Number: 204-337-6

Section 4: First Aid Measures

Always seek medical attention after first aid measures are provided.

Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Skin: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Ingestion: Call Emergency Medical immediately. Rinse mouth with cold water. Give victim 1-2 cups of water or milk to drink. Induce vomiting immediately.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.

Section 5: Fire Fighting Measures

Flash point: 110C literature.
Suitable extinguishing media
: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Avoid high pressure water jet.
Protective equipment and precautions for firefighters: Use water spray, foam, or dry chemical to extinguish fire. Firefighters should wear full fire-fighting turn-out gear and respiratory protection. Cool container with water spray.
Special hazards arising from the substance: Carbon oxides and fumes. Combustible material, Vapors are heavier than air and may spread along floors. Development of hazardous combustion gases or vapors possible in the event of fire. Forms explosive mixtures with air on intense heating.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Section 6: Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Section 7: Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, and bases.

Section 8: Exposure Controls / Personal Protection
Exposure guidelines: Not Available.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Section 9: Physical and Chemical Properties

Appearance: White solid.
Odor: Sweet-woody-geranium-like.
Odor threshold: Not available.
pH (1% soln/water): 3 Not available.
Relative density: around 1.1
Boiling Point: 305C literature.
Melting Point: 48C literature.
Flash point: 110C literature.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Insoluble in water. Soluble in alcohol.
Viscosity: Not available.

Section 10: Stability and Reactivity

Avoid heat and ignition sources. Forms explosive mixtures with air on intense heating.
Stability: Stable under normal conditions of use and storage.
Incompatibility: Heat, direct sunlight, and strong oxidizing agents, strong acids, and bases.
Hazardous Decomposition Products: Carbon oxides and fumes.
Hazardous Polymerization: Has not been reported.

Section 11: Toxicology Information

LC50 Inhalation - Rat - 1 h - 5.200 mg/m3.
LD50 Oral – Mouse: 2895 mg/kg.
LD50 Dermal - Rabbit - 3535 mg/kg
Carcinogenicity: IARC: 2B - Group 2B: Possibly carcinogenic to humans (Benzophenone derivatives).
Reproductive Effects: No information available.
Developmental Effects: No information available.

Section 12: Ecological Information

Toxicity to fish:
flow-through test LC50 - Pimephales promelas (fathead minnow) - 14,2 mg/l - 96,0 h.
Toxicity to daphnia and other aquatic invertebrates: semi-static test EC50 - Daphnia magna (Water flea) - 6,78 mg/l - 48 h.
Ecotoxicity (aquatic and terrestrial): Toxic to terrestrial and aquatic plants and animals. Do not release to environment.
Results of PBT and vPvB assessment: No information found.
Persistence and Degradability: No information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: No information available.

Section 13: Disposal Considerations

Check with all applicable local, regional, and national laws and regulations.

Section 14: Transport Information

DOT USA, TDG Canada & ADR/RID Europe:
UN-No: UN3077
Proper Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Benzophenone derivatives).
Hazard Class: 9; Packing Group: III
IATA/ICAO & IMDG/IMO:
UN-No: UN3077
Proper Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Benzophenone derivatives).
Hazard Class: 9; Packing Group: III.

Section 15: Regulatory Information

USA:
SARA 311/312 Hazard Categories: Chronic Health Hazard. See section 2.

Section 16: Other Information

European Labeling in Accordance with EC Directives:
H373: May causes damage to organs through prolonged or repeated exposure.
H410: Harmful to aquatic life with long lasting effects.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Benzophenone SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Benzophenone manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Anmol Chemicals

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 10 January, 2022

Barter

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you